Never seen anything like this. Is this a viable option as a beginner bike?

As the title says, I want to receive HF bands, but I don't have an ideal space to set up an antenna. (I only have a receiver and may get a transceiver if this works out)
I've arbitrarily chosen the 20m band to start with, and I have the materials to construct a half-wave dipole and an air choke 1:1 balun. I am also interested in hearing ideas on how one would set up an antenna for longer wavelengths like 30, 40, 80m etc.
​

My situation:

I live in a small city suburb. My back yard is to the north, and the street is south of me. The north edge of my back yard has powetelecom lines running east/west over it, and is also at the base of a steep hill with another house 50-60ft up the hill. My back yard measures roughly 55x20 ft (about 17x6 m) and is widest E/W.
My front yard is about 35x30 ft (about 11x9m), also widest E/W. It has two trees in it about 80 ft tall, one close to the house and the other to the street.
The house is about 55 ft N/S, single story. Entire property is flat.
The next houses over (E/W) are only about 10 ft from mine on each side.
I suspect the best/easiest way to set up an antenna is to string it up in one of the trees in the front yard, but I'm not sure how to get one end of the antenna up there.
Throwing a rock through the branches with a string tied to it might be possible, but with the way the trees are situated I'd risk hitting my neighbor's cars or my roof. Don't want to take that chance.
I do have a small drone that I could probably use to run light fishing line up and over the trees, but I'm admittedly a bit worried about something going wrong (loop catching a branch, etc) and getting my drone stuck in the tree. Might be willing to try it if it's my only option.

My question(s):

Do I necessarily need a half-wave dipole to receive well on 20m? Should I make a half-wave end-fed instead, or something else?
If not in the trees, where? Do I have any other options? Attic might work but I'm worried about RFI. Would attic RFI would be less of a concern than RFI from the power lines?
Are compromise antennas worth considering in my case? If so, any suggestions on one to buy/build would be appreciated.

I got permission from the wife to mod our old daily driver, a 2007 Honda CRV, but I need help. My car knowledge is limited to changing out spark plugs and starter motors.
My stock rims measure at 17x6.5 with a bolt pattern of 5x114.3. Tires measure in at 225/65R17.
First step is to get new shoes on her. I was thinking about adding a 3" lift but I'm having issues finding a local mechanic that'll take that on, so that idea's tabled for the moment. So from here I was thinking about adding wheel spacers, wider rims, and wider tires. Tell me if this will work out.
I was thinking about adding 1.5" wheel spacers. From there I'd find four rims that measure 17x8 and find some tires (was thinking about 245/65R17) and calling it a day. Would that work?
Also, I'm confused about "offset." The internet tells me that my stock rims have a positive offset of 40 - 50 (it varies from source to source). Many new rims that I've been looking at have an offset of 35. Would they work on my vehicle? Please, educate me on this. While I've looked at diagrams of the difference between negative/zero/positive offset I'm not entirely clear on it's overall impact to my project and desired outcome.

Hi all!
I just bought a 2021 Subaru Crosstrek, and I'm picking up winter tires/steel rims. Tires will be 225/60/R17. I'm mostly seeing rims at 17x6.5in (and 5x100 pattern). The car's info sticker specifically says 17x7, though, and I've also read that if you don't match the rims to the tires specifically, you'll wear the tires faster because the edges will rub? I don't know about all that. But I also found a chart noting that the maximum tire width for 17x6.5 rims is the 215s, not the 225s.
Any risks going with 17x6.5in rims for my 225s?

Hi all! I just bought a Subaru Crosstrek, and I'm picking up winter tires/steel rims. Tires will be 225/60/R17. I'm mostly seeing rims at 17x6.5in (and 5x100 pattern). The car's info sticker specifically says 17x7, though, and I've also read that if you don't match the rims to the tires specifically, you'll wear the tires faster because the edges will rub? I don't know about all that. But I also found a chart noting that the maximum tire width for 17x6.5 rims is the 215s, not the 225s.
Am I asking for trouble going with 17x6.5in rims for my 225s?

When you're collecting postcards this week, don't catch the scatterbug after each award - run away/save them for the Noibat day Sunday when they'll be worth twice the candy (for those of us grinding away to get 2150 candies to evolve every design). 17x6 = 102 extra candies if you're using pinaps.

I’m buying winter tires for my ‘21 Hybrid Limited. Stock tires are 225/60/18 but Costco said I can get 235/65/17 with new 17in rims but advised I find rims myself. I looked around and found used 2010 RAV4 17inch rims with similar centre bore (60.1); 5x114.3 and rim 17x6.5
Is anyone able to advise if I could use these rims with the new Costco tires? Or am I missing any measurements?

I’m buying winter tires for my ‘21 Hybrid Limited. Stock tires are 225/60/18 but Costco said I can get 235/65/17 with new 17in rims but advised I find rims myself. I looked around and found used 2010 RAV4 17inch rims with similar centre bore (60.1); 5x114.3 and rim 17x6.5
Is anyone able to advise if I could use these rims with the new Costco tires? Or am I missing any measurements?

I recently sold my 2018 Hyundai Sonata and upgraded to a 2022 Ford Maverick 2.0 AWD. I had winter tires for the Sonata and the buyer didn't want to pay extra for them so I decided to keep them to either sell separate or potentially use on the Maverick or my wife's 2018 Subaru Outback. Before I go ahead and install them though, I wanted to see if anyone has a recommendation on if it'll work out.
​
The wheels I have are steelies 17X6.5 5-114 ET50 CB 67 and the tires are 215/55R17 Blizzak.
​
I believe the Maverick comes with 17x7 and the lug pattern is 5-108.
The Outback also comes with the 17x7 and the has the same 5-114.
​
Any assistance would be greatly appreciated!

Looking to get a winter setup for 2022 hyundai tucson hybrid
Stock wheels are 19x7.5 with 5x114.3 bolt, offset 45 and bore 67.1 base models are 17x7 I believe
Stock tires are 235/55/r19 on my model and 235/65/r17 on base model
I was thinking of 225/65/17 michelin x ice snows or continental viking contact 7's on either 17x6.5 or 17x7.5 steels (only two sizes available at the shop near me would prefer 17x7)
Does this setup sound good? Everyone in forums seems to be going with 235/65/r17 on 17x7 or 17x7.5
Tire size/ratio comparison sites put the 225/65/r17 greater than 1% difference in overall diameter. Would this be a problem?
Is it safe to go smaller and narrower for winter even though the diameter is smaller Or should I just stick with the base model size with winters on to keep diameter closer and not worry about the narrow tire gains in messy weather?
Probably over thinking this but new to buying winter setups
Thanks

I tried to Google this and found a few calculators but everything is giving different results. My snow tires are 225/45 R17 and the rims I'm looking at are 17x6.5 (the bolt pattern is correct) would these fit or do you know of a reliable calculator?

Hi! I'm trying to play games in my laptop but unfortunately it's heating up so bad (reaches 90C). I installed thermald as it was suggested by others and it doesn't have an effect to my laptop. It still reaches up to 90C as shown in mangohud.
What I'm expecting is that whenever it heats up so bad, it should throttle down my CPU and GPU but the freqs stay the same even at 90-92C. Also, when playing the same game in Windows, it doesn't heat up that bad it's like 5-10C lower. I've already cleaned out the fans and it's still the same.
Does anyone have an idea on minimizing this overheating in my laptop? Thanks! :DD
This is my specs:
garuda-inxi

System: Kernel: 6.0.9-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=8be5a5b2-923e-4e51-8658-cc49328f161c rw rootflags=subvol=@ quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0 resume=UUID=5321fe67-a6f1-43d0-addc-64d4a749ece7 loglevel=3 Desktop: KDE Plasma v: 5.26.3 tk: Qt v: 5.15.7 info: latte-dock wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux Machine: Type: Laptop System: Acer product: Aspire A514-52KG v: V1.04 serial: Chassis: type: 10 serial: Mobo: KBL model: Sneezy_KL v: V1.04 serial: UEFI: Insyde v: 1.04 date: 08/28/2020 Battery: ID-1: BAT0 charge: 22.0 Wh (66.7%) condition: 33.0/47.9 Wh (69.0%) volts: 12.2 min: 11.4 model: Murata KT003040 AP18C4K type: Li-ion serial: status: charging cycles: 223 CPU: Info: model: Intel Core i3-7020U bits: 64 type: MT MCP arch: AmbeKaby Lake note: check gen: core 7 level: v3 note: check built: 2017 process: Intel 14nm family: 6 model-id: 0x8E (142) stepping: 9 microcode: 0xF0 Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB Speed (MHz): avg: 1100 min/max: 400/2300 scaling: driver: intel_pstate governor: powersave cores: 1: 1100 2: 1100 3: 1100 4: 1100 bogomips: 18399 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable Type: mds mitigation: Clear CPU buffers; SMT vulnerable Type: meltdown mitigation: PTI Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable Type: retbleed mitigation: IBRS Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: Not affected Type: srbds mitigation: Microcode Type: tsx_async_abort status: Not affected Graphics: Device-1: Intel HD Graphics 620 vendor: Acer Incorporated ALI driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:5921 class-ID: 0300 Device-2: NVIDIA GM108M [GeForce MX130] vendor: Acer Incorporated ALI driver: nvidia v: 520.56.06 alternate: nouveau,nvidia_drm non-free: 520.xx+ status: current (as of 2022-10) arch: Maxwell code: GMxxx process: TSMC 28nm built: 2014-19 pcie: gen: 1 speed: 2.5 GT/s lanes: 4 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.0 chip-ID: 10de:174d class-ID: 0302 Device-3: Chicony HD User Facing type: USB driver: uvcvideo bus-ID: 1-2:2 chip-ID: 04f2:b64f class-ID: 0e02 serial: Display: x11 server: X.Org v: 21.1.4 with: Xwayland v: 22.1.5 compositor: kwin_x11 driver: X: loaded: modesetting,nvidia unloaded: nouveau alternate: fbdev,intel,nv,vesa dri: iris gpu: i915 display-ID: :0 screens: 1 Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99") s-diag: 414mm (16.31") Monitor-1: eDP-1 model: ChiMei InnoLux 0x14d6 built: 2016 res: 1366x768 hz: 60 dpi: 112 gamma: 1.2 size: 309x173mm (12.17x6.81") diag: 354mm (13.9") ratio: 16:9 modes: 1366x768 API: OpenGL v: 4.6 Mesa 22.2.3 renderer: Mesa Intel HD Graphics 620 (KBL GT2F) direct render: Yes Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_soc_avs bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403 Sound API: ALSA v: k6.0.9-zen1-1-zen running: yes Sound Server-1: PulseAudio v: 16.1 running: no Sound Server-2: PipeWire v: 0.3.60 running: yes Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Acer Incorporated ALI driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200 IF: enp2s0 state: down mac: Device-2: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter vendor: Lite-On driver: ath10k_pci v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 168c:003e class-ID: 0280 temp: 66.0 C IF: wlp3s0 state: up mac: IF-ID-1: CloudflareWARP state: unknown speed: 10 Mbps duplex: full mac: N/A Bluetooth: Device-1: Lite-On type: USB driver: btusb v: 0.8 bus-ID: 1-7:3 chip-ID: 04ca:3016 class-ID: e001 Report: bt-adapter ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: Drives: Local Storage: total: 1.14 TiB used: 571.11 GiB (49.0%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SNVS250G size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: rev: EDFK9NO2 temp: 33.9 C scheme: GPT ID-2: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ04ABF100 size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: rev: 1J scheme: GPT Partition: ID-1: / raw-size: 49.59 GiB size: 49.59 GiB (100.00%) used: 13.67 GiB (27.6%) fs: btrfs dev: /dev/nvme0n1p7 maj-min: 259:7 ID-2: /boot/efi raw-size: 1024 MiB size: 1022 MiB (99.80%) used: 312 KiB (0.0%) fs: vfat dev: /dev/nvme0n1p5 maj-min: 259:5 ID-3: /home raw-size: 68.36 GiB size: 68.36 GiB (100.00%) used: 23.11 GiB (33.8%) fs: btrfs dev: /dev/sda4 maj-min: 8:4 ID-4: /valog raw-size: 49.59 GiB size: 49.59 GiB (100.00%) used: 13.67 GiB (27.6%) fs: btrfs dev: /dev/nvme0n1p7 maj-min: 259:7 ID-5: /vatmp raw-size: 49.59 GiB size: 49.59 GiB (100.00%) used: 13.67 GiB (27.6%) fs: btrfs dev: /dev/nvme0n1p7 maj-min: 259:7 Swap: Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) ID-1: swap-1 type: zram size: 7.51 GiB used: 111.2 MiB (1.4%) priority: 100 dev: /dev/zram0 ID-2: swap-2 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p6 maj-min: 259:6 Sensors: System Temperatures: cpu: 58.0 C pch: 60.5 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 249 Uptime: 38m wakeups: 1 Memory: 7.51 GiB used: 3.78 GiB (50.3%) Init: systemd v: 252 default: graphical tool: systemctl Compilers: gcc: 12.2.0 Packages: pm: pacman pkgs: 1471 libs: 399 tools: octopi,paru Shell: fish v: 3.5.1 default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.23 Garuda (2.6.9-1): System install date: 2022-11-13 Last full system update: 2022-11-20 Is partially upgraded: No Relevant software: NetworkManager Windows dual boot: Probably (Run as root to verify) Snapshots: Snapper Failed units: systemd-networkd-wait-online.service

About how much would if cost for a battery that is appropriate for this motor and motor controller: https://m.alibaba.com/product/1600397956115/SiAECOSYS-17X6-0inch-12000W-V4-96V.html?spm=a2706.onesight_pla_wap.0.0.3f5cFrUJFrUJIe

I popped an Energy Saver 1000 miles into ownership (can’t help but feel that the car sitting for a year contributed to this) and had OnStar tow the car to the dealer for an expensive replacement that took 3 days due to limited supply of Energy Saver tires currently.
I would like to purchase a full-size steel wheel with a full-size spare to keep in my garage for future flats (I would have to get a ride to get it or have someone bring it to me, but that’s better than a $200 tow). Problem is I can’t find the actual size of the stock EUV rim.
Anyone know if it is 17x6.5 or 17x7? I see plenty of options with the same 105x5 bolt pattern on ebay. I’ll be getting an S10 jack, etc as well. Thanks!

Hello there!
I have a HP chromebook x360 c14. I've happily installed manjaro in it using mrchromebox script.
I have had some severe issues getting my soundcard to work. Finally i got it working by switching to linux kernel 6.
I have however had some weird crashes so I'm looking to downgrade kernel version. However the guides on internet do not work. Ive read that I have to change the kernel version in the GRUB menu, however i have the mrchromebox boot menu (with the rabbit icon).
Does anyone know how I can downgrade my kernel ?
Thanx in advance!
​
This is my system info:

System: Kernel: 6.0.2-2-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: BOOT_IMAGE=/boot/vmlinuz-6.0-x86_64 root=UUID=132c0983-7600-47e3-b5a6-a1cb78ee220a rw quiet splash apparmor=1 security=apparmor resume=UUID=b125d531-c3f9-4f5e-bf7c-0644d0456280 udev.log_priority=3 Desktop: GNOME v: 42.5 tk: GTK v: 3.24.34 wm: gnome-shell dm: GDM v: 42.0 Distro: Manjaro Linux base: Arch Linux Machine: Type: Laptop System: Google product: Dragonair v: rev4 serial:  Chassis: type: 9 serial:  Mobo: HP model: Dragonair v: rev4 serial:  UEFI: coreboot v: MrChromebox-4.17.2 date: 07/18/2022 Battery: ID-1: BAT0 charge: 40.1 Wh (78.0%) condition: 51.4/61.2 Wh (84.0%) volts: 11.9 min: 11.6 model: 333-1C- BC03060 type: Li-ion serial:  status: discharging cycles: 234 Device-1: hid-0018:27C6:0E02.0001-battery model: GDIX0000:00 27C6:0E02 serial: N/A charge: N/A status: N/A Memory: RAM: total: 7.64 GiB used: 2.86 GiB (37.5%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Info: model: Intel Core i5-10210U bits: 64 type: MT MCP arch: Comet/Whiskey Lake note: check gen: core 10 level: v3 note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x8E (142) stepping: 0xC (12) microcode: 0xF0 Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB Speed (MHz): avg: 847 high: 900 min/max: 400/4200 scaling: driver: intel_pstate governor: powersave cores: 1: 833 2: 846 3: 880 4: 900 5: 893 6: 800 7: 800 8: 827 bogomips: 33615 Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ibrs_enhanced ida intel_pt invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pts rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable Type: retbleed mitigation: Enhanced IBRS Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: SW sequence Type: srbds mitigation: Microcode Type: tsx_async_abort status: Not affected Graphics: Device-1: Intel CometLake-U GT2 [UHD Graphics] driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: DP-1,DP-2 bus-ID: 00:02.0 chip-ID: 8086:9b41 class-ID: 0300 Device-2: Cheng Uei Precision Industry (Foxlink) HP Wide Vision HD Camera type: USB driver: uvcvideo bus-ID: 1-7:2 chip-ID: 05c8:03e1 class-ID: 0e02 serial:  Display: wayland server: X.org v: 1.21.1.4 with: Xwayland v: 22.1.3 compositor: gnome-shell driver: gpu: i915 display-ID: 0 Monitor-1: eDP-1 model: AU Optronics 0x818b built: 2019 res: 1920x1080 dpi: 158 gamma: 1.2 size: 309x174mm (12.17x6.85") diag: 355mm (14") ratio: 16:9 modes: 1920x1080 OpenGL: renderer: Mesa Intel UHD Graphics (CML GT2) v: 4.6 Mesa 22.1.7 direct render: Yes Audio: Device-1: Intel Comet Lake PCH-LP cAVS driver: sof-audio-pci-intel-cnl alternate: snd_hda_intel,snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3 chip-ID: 8086:02c8 class-ID: 0401 Sound API: ALSA v: k6.0.2-2-MANJARO running: yes Sound Server-1: JACK v: 1.9.21 running: no Sound Server-2: PulseAudio v: 16.1 running: no Sound Server-3: PipeWire v: 0.3.58 running: yes Network: Device-1: Intel Comet Lake PCH-LP CNVi WiFi driver: iwlwifi v: kernel bus-ID: 00:14.3 chip-ID: 8086:02f0 class-ID: 0280 IF: wlp0s20f3 state: up mac:  IP v4:  type: dynamic noprefixroute scope: global broadcast:  IP v6:  type: noprefixroute scope: link IF-ID-1: manjaro state: unknown speed: N/A duplex: N/A mac: N/A IP v4:  type: noprefixroute scope: global broadcast:  IP v6:  type: noprefixroute scope: global IP v6:  type: noprefixroute scope: link IF-ID-2: virbr0 state: down mac:  IP v4:  scope: global broadcast:  WAN IP:  Bluetooth: Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-10:3 chip-ID: 8087:0026 class-ID: e001 Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 116.48 GiB used: 87.78 GiB (75.4%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: SanDisk model: DA4128 size: 116.48 GiB block-size: physical: 512 B logical: 512 B type: SSD serial:  rev: 0x8 scheme: GPT Message: No optical or floppy data found. Partition: ID-1: / raw-size: 107.38 GiB size: 105.14 GiB (97.91%) used: 87.78 GiB (83.5%) fs: ext4 dev: /dev/mmcblk1p2 maj-min: 179:2 label: N/A uuid: 132c0983-7600-47e3-b5a6-a1cb78ee220a ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 312 KiB (0.1%) fs: vfat dev: /dev/mmcblk1p1 maj-min: 179:1 label: NO_LABEL uuid: C899-878E Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/mmcblk1p3 maj-min: 179:3 label: swap uuid: b125d531-c3f9-4f5e-bf7c-0644d0456280 Unmounted: ID-1: /dev/mmcblk1boot0 maj-min: 179:8 size: 4 MiB fs:  label: N/A uuid: N/A ID-2: /dev/mmcblk1boot1 maj-min: 179:16 size: 4 MiB fs:  label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 12 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-7:2 info: Cheng Uei Precision Industry (Foxlink) HP Wide Vision HD Camera type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 05c8:03e1 class-ID: 0e02 serial:  Device-2: 1-10:3 info: Intel AX201 Bluetooth type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0026 class-ID: e001 Hub-2: 2-0:1 info: Super-speed hub ports: 6 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 50.0 C pch: 49.0 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 308 Uptime: 6m wakeups: 10011 Init: systemd v: 251 default: graphical tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6 Packages: pm: pacman pkgs: 1603 libs: 347 tools: gnome-software,pamac,yay pm: flatpak pkgs: 0 Shell: Zsh v: 5.9 running-in: gnome-terminal inxi: 3.3.22